{"id":3648,"date":"2011-08-15T09:29:07","date_gmt":"2011-08-15T09:29:07","guid":{"rendered":"http:\/\/localhost\/basquemtb\/?p=3648"},"modified":"2020-12-22T10:37:44","modified_gmt":"2020-12-22T10:37:44","slug":"mountain-bike-maintenance-removing-a-stuck-cassette-hope-pro-2-chris-king-hub","status":"publish","type":"post","link":"https:\/\/www.basquemtb.com\/es\/mountain-bike-maintenance-removing-a-stuck-cassette-hope-pro-2-chris-king-hub\/","title":{"rendered":"Mantenimiento de la bicicleta de monta\u00f1a: Casete atascado"},"content":{"rendered":"

Mantenimiento de la bicicleta de monta\u00f1a: Casete atascado<\/h2>\n\n\n\n
\nhttps:\/\/vimeo.com\/27697737\n<\/div><\/figure>\n\n\n\n

Despite only using SLX or XT cassettes<\/strong> on my new Hope Pro 2 wheels<\/strong> there has been some damage to the cassette carrier. I managed to remove the last cassette with a bit of brute force however today the cassette was absolutely siezed on<\/strong> and needed a different approach to remove. I have previously had the same problem with my Chris King hub<\/strong> and used the same method to remove the cassette. Read on to see how I removed the cassette<\/strong>.<\/object><\/p>\n\n\n\n\n\n\n\n

1. Attach the splined cassette removal tool as normal using the QR lever to hold it in place.<\/p>\n\n\n\n

2. Put a spanner on the cassette removal tool and hold the spanner in place with your knee. (If you can’t do this then tie it to the spokes).<\/p>\n\n\n\n

3. Take a flat bladed screwdriver and hammer and tap the cassette in the opposite direction to the force applied by the chain. Make sure you tap each part of the cassette.<\/p>\n\n\n\n

4. Try to remove the cassette now. I find that I can now only get the smaller rings off at this point.<\/p>\n\n\n\n

5. Do NOT try to lever the back of the cassette off the hub, with the Hope hub this will only remove the whole freehub body. Instead put the wheel down with the end of the cassette carrier on a block of wood and tap the back of the cassette GENTLY with a flat bladed screwdriver and hammer. You should feel the cassette shift, hammer it until it reaches the end of the cassette carrier.<\/p>\n\n\n\n

6. Try to slide the cassette off now. I had to lever the smaller set of rings away from the larger ones using a screwdriver to get them off. Finally the large rings should just slide off.<\/p>\n\n\n\n

7. THUMBS UP! All done now.<\/p>\n\n\n\n

For information, I have used both my Hope Pro 2<\/strong> y Chris King hubs<\/strong> with either SLX or XT (9-speed and 10-speed) cassettes<\/em><\/strong>. The Chris King was 2 years old before I retired it and I\u00a0had siezed cassette issues from the first time I changed a cassette. The Hope Pro 2 is 8 months old and I had issues removing the first cassette after 3 months. Bear in mind that I usually ride around 24 days a month, on rough mountain trails with steep climbs and technical descents.<\/p>\n\n\n\n

\u00a1Reserve sus vacaciones en bicicleta de monta\u00f1a BasqueMTB!<\/h2>

M\u00e1s informaci\u00f3n<\/p><\/div><\/div>

M\u00e1s informaci\u00f3n<\/a><\/div><\/div>\n\n\n\n

Consulte nuestras \u00faltimas historias<\/h2>\n\n\n
\"Bera<\/a><\/div>

Building MTB Trails In The Basque Country and Building Community<\/a><\/h3>
<\/div><\/header>
<\/div><\/div><\/article>\n
\"\"<\/a><\/div>

Essentials for MTB Holidays<\/a><\/h3>
<\/div><\/header>
<\/div><\/div><\/article>\n
\"\"<\/a><\/div>

En marcha: \u00danete a una excursi\u00f3n en BTT por los Pirineos en primavera de 2025<\/a><\/h3>
<\/div><\/header>
<\/div><\/div><\/article>\n
\"\"<\/a><\/div>

Bicicleta de monta\u00f1a en los Pirineos: Senderos y h\u00e9roes locales<\/a><\/h3>
<\/div><\/header>
<\/div><\/div><\/article>\n<\/div><\/div>","protected":false},"excerpt":{"rendered":"

How to remove a siezed cassette from a Chris King \/ Hope Pro 2 hub. WIth lightweight hubs the cassette can dig into the carrier, follow these steps to remove your cassette. <\/p>","protected":false},"author":1,"featured_media":9768,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_monsterinsights_skip_tracking":false,"_monsterinsights_sitenote_active":false,"_monsterinsights_sitenote_note":"","_monsterinsights_sitenote_category":0,"footnotes":""},"categories":[111],"tags":[],"class_list":["post-3648","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-mountain-bike-repair"],"featured_image_src":"https:\/\/www.basquemtb.com\/wp-content\/uploads\/184141758_6401-600x360.jpg","featured_image_src_square":"https:\/\/www.basquemtb.com\/wp-content\/uploads\/184141758_6401-600x360.jpg","author_info":{"display_name":"admin","author_link":"https:\/\/www.basquemtb.com\/es\/author\/admin\/"},"_links":{"self":[{"href":"https:\/\/www.basquemtb.com\/es\/wp-json\/wp\/v2\/posts\/3648","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.basquemtb.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.basquemtb.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.basquemtb.com\/es\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.basquemtb.com\/es\/wp-json\/wp\/v2\/comments?post=3648"}],"version-history":[{"count":0,"href":"https:\/\/www.basquemtb.com\/es\/wp-json\/wp\/v2\/posts\/3648\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.basquemtb.com\/es\/wp-json\/wp\/v2\/media\/9768"}],"wp:attachment":[{"href":"https:\/\/www.basquemtb.com\/es\/wp-json\/wp\/v2\/media?parent=3648"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.basquemtb.com\/es\/wp-json\/wp\/v2\/categories?post=3648"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.basquemtb.com\/es\/wp-json\/wp\/v2\/tags?post=3648"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}